6 settings, Settings – Acronis Access Advanced - Administrator's Guide User Manual

Page 53

Advertising

To move your Legacy Data Sources to the new system:

1. Find the mobilEcho File Server on which the Data Source resides.
2. Upgrade the mobilEcho File Server to the Acronis Access Gateway server.
3. Open the Acronis Access web interface and log in as an administrator.
4. Open the Gateway Servers tab.
5. Add your server to the list of Gateway Servers. For more information on this process, visit the

Managing Gateway Servers (p. 33) section.

6. Add a license for the Gateway Server.
7. Repeat this process for every Legacy data source.

After these steps, the Legacy Data Sources tab will disappear and all of your Legacy Data Sources will
be moved to the Folders section.

1.6 Settings

Enrollment Settings



Mobile Client Enrollment Address - specifies the address which mobile clients should use when
enrolling in client management.

Note: It is highly recommended to use a DNS name for the mobile client enrollment address. After
successfully enrolling in Client Management, the Access Mobile Client app stores the address of the
management server. If that address is an IP address and it changes, the users cannot reach the server, the
app cannot be unmanaged and the users will have to delete the whole app and enroll in management
again.



Allow mobile clients restored to new devices to auto-enroll without PIN – when enabled,
allows users managed by older versions of Access Mobile Client to enroll to your new server
without needing a PIN.



Use user principal name (UPN) for authentication to Gateway Servers - when enabled, users will
authenticate to Gateway Servers with their UPN (e.g. [email protected]). When disabled,
users will authenticate with their domain name and username (e.g. domain/user).

Device Enrollment Requires:



PIN number + Active Directory username and password - In order to activate their Acronis
Access app and gain access to Acronis Access servers, a user is required to enter an expiring,
one-time use PIN number and a valid Active Directory username and password. This option
ensures that a user can only enroll one device, and only after receiving a PIN number issued by

Advertising