Acronis Access Advanced - Administrator's Guide - Manual (Page 75)

75 Copyright © Acronis International GmbH, 2002-2014
To license them, you will need a mobilEcho license. Follow the steps below:
1. Open the web interface and log in as an administrator.
2. Open the General Settings tab and open the Licensing page.
3. In the Legacy mobilEcho Licenses section you have a list of all Gateway servers using the old
licensing.
4. Press Add License for the desired Gateway and enter your license key.
5. Press Save.
3.9 Debug Logging
Settings in this page are designed to enable extended logging information that might be useful when
configuring and troubleshooting Acronis Access. It is recommended that these settings only be
changed at the request of a customer support representative. Additional debug logging can be useful
in troubleshooting problems on the server.
Note: For information on enabling/disabling debug logging for a specific Gateway Server visit the Server Details
(p. 36) article.