Canon VK-64 - Manual (Page 124)

124
Setting Motion Detection Recording
Click OK to save the new settings and close the dialog.
Click Cancel to discard the new settings.
Refer to the Chapter 6 for optimizing the Motion Detection
operation.
Tip
If the before event and after event fields are set to 0 seconds,
video will still be recorded while motion is detected.
Note
●
Step 6: Set the External Outputs
Click the drop-down menu for the
target external device and set On or
Not specified.
Available external outputs depend on the Camera Server.
If the Picture Recording feature of a Camera Server is used
and its configuration includes a preset position then this
preset position will override camera positions set by VK-
64/VK-16, including those in recording schedules and the
Viewing Screen. If VK-64/VK-16 has camera control, this will
be lost when the Camera Server is setting a new preset
position.
Note