Canon VK-64 - Manual (Page 82)

Displaying the Storage and Camera Server Summary Windows
Launch the VK Viewer and display the Storage and Camera Server Summary window.
Adding the Storage Server
In the Storage and Camera Server
Summary, select the Storage Servers
tab.
Click Add Storage Server to bring up
the Add Storage Server dialog.
Enter connection settings
and click OK.
3
2
1
Adding the Storage Server
82
If you are using multiple Storage Servers, add each Storage Server as directed below. You
need not perform these steps if you are using only one Storage Server and that Storage
Server has already been added.
By adding the Storage Server, you can select the Camera Servers managed by the
Storage Server from the Viewer screen.
You can operate VK-64 with up to ten Storage Servers using any
Up to 192 Camera Servers can be operated.
Tip
If you are using the Viewer only, the Storage Servers tab is not
shown and you cannot add the Storage Server.
Note