Canon VK-64 - Manual (Page 276)

276
Backup of VB Settings
●
Notes
<Backup Tool/Restore Tool>
Before using the Tool, close any other applications.
Use the Tool in a secure network environment such as an intranet.
Transmit or receive files via FTP (HTTP proxy is not supported).
<Restore Tool>
You can restore backup files only when their model, the video signal (NTSC/PAL), and
whether they have audio input or not, correspond to the network camera to which you
want to restore the files.
You cannot restore backup files created by a new version of firmware to a network
camera of which the firmware is of an older version.
For backup files, specify the files created by Setting Values Backup Tool.
You cannot restore backup files that have been edited or converted.
Do not change the administrator password and network settings (address setting
method, IP address, subnet mask, default gateway) from the values specified in the
network camera.