Other menu options, Arranging video windows – Canon VK-64 User Manual

Page 190

Advertising
background image

190

It is recommended to install the Viewer and/or NC Viewer in
advance.
The camera server which is sending or receiving audio cannot
interact with other Viewer or Admin Viewers.
Shade Correction cannot be applied to multiple Video
Windows.
Shade correction is performed by using image processing
within the Viewer and not on the Camera Server. It can be
used on live or recorded video (see below).

Note

Arranging Video Windows

Other Menu Options

Other functions available from the Video Window menu include:

Click Shade Correction to correct shaded areas in
the Video Window. This affects the individual Video
Window on display, i.e., any duplicate (unselected)
windows are not affected. This is discussed on the
following page.

Click Admin Viewer the WebView Livescope Viewer if the Admin Viewer or
NC Viewer is both installed. For the VB-C300, the NC Viewer is activated.
Refer to your Camera Server User’s Manual for more information on the Admin
Viewer or NC Viewer.

When the audio function of the VB-C300, VB-C50i/VB-C50iR, or VB-C50FSi is
enabled, you can transmit and receive audio. To use audio, click this menu to
display the Audio Panel (

➝ P. 191). Refer to your VB-C300, VB-C50i/VB-

C50iR, or VB-C50FSi User’s Manual for more information on the audio
settings.

Click Close Window to close the Video Window that is currently selected. You can also
close a selected Video Window by pressing the Delete key.

Click Night mode and select Disabled, Enabled, IR
light
off, or Enabled, IR light on from the sub-menu.
Selecting Enabled, IR light on will remove the IR cut
filter and turn the built-in IR light on. The IR light cannot
be used with the VB-C300, VB-C50FSi, or VB-C50Fi.

Click Control External Devices to control any external
devices that may be connected to your Camera Server.
This is only enabled when you have camera control.

Advertising