Canon VK-64 - Manual (Page 132)

132
Setting the Preset Tour
Use the Preset Tour function to move among multiple preset positions sequentially.
In the Add/Edit Schedule Item dialog, there are two options available for setting the
Preset Tour function. To set the Preset Tour function.
Setting Presets
●
Add a Preset
Check the Preset Tour box and click
Settings....
The Preset Tour Settings dialog is
displayed.
Click Add.
The Preset Tour (Add) dialog
appears.
Select a preset to add from the
Preset drop-down menu.
For the selected preset, configure the Speed (PT), Speed (Z), and Pause (sec)
settings.
Drag the slide bar for each item to set the value.
4
3
2
1
The durability of camera Pan/Tilt mechanism may be affected
depending on the Preset Tour setting (
➝ P. 135).
In the Preset Tour, the camera position returns to the first
preset after the last preset.
When the Preset Tour is used, the Motion Detection recording,
backlight compensation, and additional options are not
available.
Presets used for Preset Tour are created on the Camera
Server.
Please refer to the Camera Server’s User’s Manual for details
on creating camera presets.
Preset Tour can be used with VB-C300, VB-C50, and VB-C50iR
only.
Note