Canon VK-64 - Manual (Page 152)

152
Starting the Viewer
If you need to use a proxy server, you need to change the
Internet option settings in the following procedure:
1. Select Start > Control Panel > Internet Option.
2. Select the Connection tab.
3. Click LAN settings ….
Change the proxy server settings.
If using a proxy server between a Viewer and a Storage Server,
it should be one which does not perform response buffering.
Proxies which are configured to perform response buffering
may lead to delays in sending small amounts of data (such as
events) from the Storage Server to the Viewer. The Apache
proxy server does perform response buffering so is not
recommended.
You cannot transmit or receive audio when using a proxy
server.
Note
Specify the IP address of Storage Server to connect Viewer
If you installed the Viewer and Storage Server on separate PCs, specify an IP address of
Storage Server and connect Viewer to the Storage Server.
Select Use IP address from
the drop-down menu.
Click Connect.
Enter the IP address or host
name of the Master Storage
Server in Host Name or IP,
and the port number in Port.
Click Connect.
Enter your User Name and
Password, and click Login.
5
4
3
2
1
The dialog for entering the IP address will also be shown even
when connection to the Storage Server failed.
Tip