Canon VK-64 - Manual (Page 150)

150
Starting the Viewer
Launching Procedure
Before you launch the Viewer, make sure your monitor resolution is set to a minimum of
1024 x 768 pixels.
●
Start the Viewer
Double-click the VK Viewer desktop icon.
localhost
Connects to Storage Server
and starts the Viewer.
Select this option to use the
local PC where Viewer is
installed as the Master
Storage Server.
Alternatively, from the Windows Start menu select: Programs > WebView
Livescope > Network Video Recorder VK Series v1.3 > VK Viewer.
The connect option menu for Storage Server is displayed. Select the Master
Storage Server option and click Connect.
Start-up Screen
Use IP address
Connects to Storage Server
and starts the Viewer by
specifying its IP address.
Select this option when the
Storage Server and the
Viewer are installed on
separate PCs.
Not use Storage Server
Select this option to use the
Viewer only without
connecting to a Storage
Server.
You need the user name and password set for the VK-64/VK-16
Storage Server to start the Viewer.
Note
If a connection error occurs, you may not have a Master Storage
Server connected.
Tip