Dell Studio 1440 (Mid 2009) - Manual (Page 20)

5. Lift the tape that secures the display panel cable to the connector and remove the cable from the connector.
6. Lift the display panel off the display cover.
Replacing the Display Panel
1. Connect the display panel cable to the connector on the display panel and secure it with the tape.
2. Align the display panel with the display cover and replace the eight screws that secure the display panel to the display cover.
3. Replace the display bezel (see Replacing the Display Bezel ).
4. Replace the display assembly (see Replacing the Display Assembly ).
Display Panel Bracket
Removing the Display Panel Bracket
1. Remove the display assembly (see Removing the Display Assembly ).
2. Remove the display bezel (see Removing the Display Bezel ).
3. Remove the display panel (see Removing the Display Panel ).
4. Remove the six screws (three on each side) that secure the display panel brackets to the display panel.
Replacing the Display Panel Bracket
1. Replace the six screws (three on each side) that secure the display panel brackets to the display panel.
2. Replace the display panel (see Replacing the Display Panel ).
3. Replace the display bezel (see Replacing the Display Bezel ).
4. Replace the display assembly (see Replacing the Display Assembly ).
Back to Contents Page
1 display panel bracket (1 left, 1 right) 2 screws (6 total; 3 on each side)