Replacing the system board – Dell Studio 1440 (Mid 2009) User Manual
Page 49
16.
Remove the six screws that secure the system board to the computer base.
17.
Lift the system board at an angle toward the side of the computer and out of the computer base.
Replacing the System Board
1.
Follow the instructions in
Before You Begin
.
2.
Place the system board on the computer base.
3.
Replace the six screws that secure the system board to the computer base.
4.
Connect the AC adapter cable to the connector on the system board.
5.
Connect the hall sensor cable to the connector on the system board.
6.
Replace the coin-cell battery (see
Replacing the Coin-Cell Battery
).
7.
Replace the tweeters (see
Replacing the Tweeters
).
8.
Replace the speakers (see
Replacing the Speakers
).
9.
Replace the bluetooth card (see
Replacing the Bluetooth Card
).
10.
Replace the display assembly (see
Replacing the Display Assembly
).
11.
Replace the Mini-Cards, if applicable (see
Communication Cards
).
12.
Replace the palm rest (see
Replacing the Palm Rest
).
13.
Replace the hard drive (see
Replacing the Hard Drive
).
14.
Replace the keyboard (see
Replacing the Keyboard
).
15.
Replace the memory modules (see
Replacing the Memory Module
).
16.
Replace the battery (see
Replacing the Battery
).
17.
Reinstall any removed cards in the ExpressCard slot or 8-in-1 Media Card Reader.
1
AC adapter cable
2
screws (6)
3
hall sensor cable