Internal card with bluetooth® wireless technology, Removing the bluetooth card, Replacing the bluetooth card – Dell Studio 1440 (Mid 2009) User Manual
Page 7
Back to Contents Page
Internal Card With Bluetooth® Wireless Technology
Dell™ Studio 14z Service Manual
Removing the Bluetooth Card
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the hard drive (see
Removing the Hard Drive
).
5.
Remove the palm rest (see
Removing the Palm Rest
).
6.
Remove the screw that secures the bluetooth card to the system board.
7.
Lift the bluetooth card off the system board.
Replacing the Bluetooth Card
1.
Follow the procedures in
Before You Begin
.
2.
Align the connector on the bluetooth card with the connector on the system board and press gently.
3.
Replace the screw that secures the bluetooth card to the system board.
4.
Replace the palm rest (see
Replacing the Palm Rest
).
5.
Replace the hard drive (see
Replacing the Hard Drive
).
6.
Replace the keyboard (see
Removing the Keyboard
).
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
1
bluetooth card
2
screw