Configuration of your printer instructions, User settings, Menu map – Dell 3000cn Color Laser Printer User Manual
Page 140: Other problem, Contacting service, Troubleshooting guide
your printer has the minimum 128 MB memory required.
Printer
memory
· Make sure the printer memory is securely connected to the printer system board.
Other Problem
Condensation has occurred inside the printer.
Using the operator panel, set the time the printer is in the power saver mode to 60 minutes, and then leave the printer
turned on. The inside of the printer warms up and condensation evaporates. When the condensation evaporates you
can use the printer normally.
Contacting Service
When you call for printer service, be prepared to describe the problem you are experiencing or the error message on the
display.
You need to know your printer model type and serial number. See the label on the back of the printer near the power cable
for this information.
Troubleshooting Guide
Configuration of your printer instructions
User Settings
Menu Map