Port settings, Tcp/ip – Dell 3000cn Color Laser Printer User Manual
Page 25
Asset Tag Number Specifies the asset tag number.
EWS
Settings
Auto Refresh On Refreshes the contents of the status display pages automatically.
Off Does not refresh the status display pages automatically.
Auto Refresh
Interval
Sets the time interval for refreshing the contents of the status display pages automatically
from 15 to 600 seconds.
NOTE:
The auto refresh feature is effective for the contents of the Top Frame, Printer Status page, Job List page,
and Completed Jobs page.
Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
Ethernet Ethernet
Settings
Auto
Detects Ethernet transmission rate and the duplex settings automatically.
10BASE-T Half-
Duplex
Selects 10Base-T Half-Duplex as the default value.
10BASE-T Full-
Duplex
Selects 10Base-T Full-Duplex as the default value.
100BASE-TX
Half-Duplex
Selects 100Base-T Half-Duplex as the default value.
100BASE-TX Full-
Duplex
Selects 100Base-T Full-Duplex as the default value.
Current Ethernet Settings
Displays the current settings of Ethernet.
MAC Address
Displays the printer's MAC address.
Port
Settings
LPD
Select the check box to enable the LPD.
Port9100
Select the check box to enable the Port9100.
FTP
Select the check box to enable the FTP port.
E-Mail Alert
Select the check box to enable the E-Mail Alert feature.
SNMP Agent
Select the check box to enable the SNMP.
You can also configure the transport protocol to be used. UDP can be
selected as the transport protocol.
NOTE:
The settings in the Port Settings item will be valid only when the printer is rebooted. When you change or set
this item, click the Restart printer to apply new settings. button to apply new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values: