Dell 3000cn Color Laser Printer - Manual (Page 51)

When installing the supplied 64MB memory card, see " Installing a Memory Card ."
10. Turn on the printer.
11. Make sure the optional duplex module is properly installed.
a. Press Menu.
b. Press until Configure appears, and then press or .
c. Press until Reports appears, and then press or .
d. Printer Settings is displayed. Press .
The Printer Settings page is printed.
e. Verify that the optional duplex module is listed under Printer Options in the Printer Settings page.
If the optional duplex module is not listed, turn off the printer, unplug the power cable, and reinstall the optional
duplex module.
f. Verify the Memory Capacity under General in the Printer Settings page.
12. Update your driver by following the instructions. If the printer is on a network, update the driver for each client.
Windows XP/Server 2003
1. Click Start ® Printers and Faxes.
2. Right-click this printer icon and select Properties.
3. Click the Options tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers and Faxes folder.
Windows 2000/NT4.0
1. Click Start ® Settings ® Printers.
2. Right-click this printer icon and select Properties.
3. Click the Options tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers folder.