Dell 3000cn Color Laser Printer - Manual (Page 56)

The amount of moisture in the paper affects both print quality and the ability of the printer to feed the paper properly. Leave
the paper in its original packaging until you are ready to use it. This limits the exposure of the paper to moisture changes
that can degrade its performance.
Grain Direction
Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the
paper, or grain short, running the width of the paper. For 60 to 135 g/m
2 (16 to 36 lb bond) paper, grain long fibers are
recommended. For papers heavier than 135 g/m 2 (36 lb bond), grain short is preferred.
Fiber Content
Most high-quality xerographic paper is made from 100% chemically pulped wood. Paper containing fibers such as cotton
possess characteristics that can result in degraded paper handling.
Recommended Paper
To ensure the best print quality and feed reliability, use 75 g/m 2 (20 lb) xerographic paper. Business papers designed for
general business use also provide acceptable print quality.
Always print several samples before buying large quantities of any type of print media. When choosing any print media, you
should consider the weight, fiber content, and color.
The laser printing process heats paper to high temperatures of 225°C (437°F) for Magnetic Ink Character Recognition (MICR)
applications, and 205°C (401°F) for non-MICR applications. Only use paper able to withstand these temperatures without
discoloring, bleeding, or releasing hazardous emissions. Check with the manufacturer or vendor to determine whether the
paper you have chosen is acceptable for laser printers.
Unacceptable Paper
The following paper types are not recommended for use with the printer:
Chemically treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless
copy paper (CCP), or no carbon required (NCR) paper
Preprinted papers with chemicals that may contaminate the printer
Preprinted papers that can be affected by the temperature in the printer fuser
Preprinted papers that require a registration (the precise print location on the page) greater than ±0.09 in., such as
optical character recognition (OCR) forms
In some cases, you can adjust registration with your software program to successfully print on these forms.
Coated papers (erasable bond), synthetic papers, thermal papers
Rough-edged, rough or heavily textured surface papers or curled papers
Recycled papers containing more than 25% post-consumer waste that do not meet DIN 19 309
Multiple-part forms or documents
Label paper with Cut