Dell 3000cn Color Laser Printer - Manual (Page 86)

Purpose:
To initialize the NV (non-volatile) memory. After executing this function and rebooting the printer, all the menu parameters
are reset to their default values.
Clear Storage
Purpose:
To clear all files that are stored as Secure and Proof Print in the RAM Disk.
NOTE: The Clear Storage menu is only displayed when the RAM Disk is set to Auto.
Non-Dell Toner
Purpose:
To specify whether to use the refilled Toner Cartridge or not. When this setting is On, you can use Toner Cartridges provided
by other companies.
Values:
Off*
Disables the use of refilled toner cartridges.
On
Enables the use of refilled toner cartridges.
Parallel
The Parallel menu can be adjusted to configure the parallel interface.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
ECP
Purpose:
To specify the ECP communication mode of the parallel interface.
The change becomes effective after the printer is turned off and then on again.
Values:
On*
The ECP communication mode is enabled.
Off
The ECP communication mode is disabled.