Parallel settings, Pcl settings – Dell 3000cn Color Laser Printer User Manual
Page 19
Job Timeout
Specifies the amount of time the printer waits to receive additional bytes of data from the computer.
When this timeout expires, the print job is canceled.
Panel
Language
Determine the language of the text on the operator panel screen.
Auto Log Print
Specifies whether the printer outputs logs automatically.
ID Print
Specifies a location where the user ID is printed.
Text Print
Specifies whether the printer outputs PDL data, which is not supported by the printer, as text when the
printer receives it.
Banner Sheet
Position
Specifies the position of banner sheet.
Banner Sheet
Input Tray
Specifies the tray in which the banner sheet is loaded.
RAM Disk
Specifies whether to allocate memory to the RAM Disk file system for the Secure Print and Store Print
features.
This item is only available when the optional memory card is installed.
Substitute Tray Specifies whether or not to use another size paper when the paper that is loaded in the specified tray
does not match the paper size settings for the current job.
Parallel Settings
Purpose:
To configure the parallel interface.
Values:
ECP Specifies the ECP communication mode of the parallel interface.
PCL Settings
Purpose:
To change printer settings that only affect jobs using the PCL emulation printer language.
Values:
Input Tray
Specifies the input tray.
Paper Size
Specifies the default paper size.
Orientation
Specifies how text and graphics are oriented on the page.
Duplex Print
Sets duplexing as the default for all print jobs.
This item is only available when the optional duplex module is installed.
Font
Specifies the default font from the registered fonts in the printer.
Symbol Set
Specifies a symbol set for a specified font.
Font Size
Specifies the font size for scalable typographic fonts.