Dell 3000cn Color Laser Printer - Manual (Page 29)

5. Enter "0.0.0.0" in the Address field and "0.0.0.0" in the Address Mask field.
6. Select Permit.
7. Click Apply New Settings.
Enabling and Disabling Printing from Network Addresses
You can enable printing from the "192.168" network address and disable printing from the "192.168.200" network
address. However, the example below describes how to enable printing from the "192.168.200.10" IP address.
Procedures:
1. Click the first column of the Access List row 1.
2. Enter "192.168.200.10" in the Address field and "255.255.255.255" in the Address Mask field.
3. Select Permit.
4. Click the first column of the Access List row 2.
5. Enter "192.168.200.0" in the Address field and "255.255.255.0" in the Address Mask field.
6. Select Reject.
7. Click the first column of the Access List row 3.
8. Enter "192.168.0.0" in the Address field and "255.255.0.0" in the Address Mask field.
9. Select Permit.
10. Click Apply New Settings.
Other Features
The Other Features tab includes Set Password page and Reset Print Server page.
Set Password
Purpose:
To set or change the password that is required to access the printer setup parameters from the Dell Printer Configuration
Web Tool.
Set the password of the operator panel from Security Settings in the Printer Settings.
This page can also be displayed by clicking Set Password in the Left Frame.
Values:
Administrator Password Sets the password up to 8 alphanumeric characters. The password will appear as asterisks (*)
in the field when it is entered.
Confirm Administrator
Password
Reset Print Server