Dell 5330dn Workgroup Mono Laser Printer - Manual (Page 107)

Set IP Address Utility
This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. This program is
especially for the network administrator to set several network IPs at the same time.
1. Connect the network cable to your machine.
2. Print the Configuration page of the printer to see the current network configuration and MAC address.
3. Click Start Programs DELL DELL Printers DELL 5330dn Mono Laser Printer Set IP Address.
4. Click in the SetIP Address window to open the TCP/IP configuration window.
5. Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.
6. Click OK.
7. Click Exit to close the SetIP Address program.
NOTE: You can only use Set IP Address Utility when your printer is connected to a network.
NOTE: when you enter the MAC address, enter it without colon(:).