Printing a reduced or enlarged document, Fitting your document to a selected paper size, Printing posters – Dell 5330dn Workgroup Mono Laser Printer User Manual
Page 92: For details, see, Fitting your, Document to a selected paper size
To print a border around each page on the sheet, check Print Page Border. Print Page Border is enabled only if the Pages per Side setting is set to a
number greater than one.
5.
Click the Paper tab and select the paper source, size and type.
6.
Click OK and print the document.
Printing a Reduced or Enlarged Document
You can scale your print job on a page.
1.
To change the print settings from your software application, go to printer properties.
2.
From the Paper tab, select Reduce/Enlarge on the Output size drop-down list.
3.
Enter the scaling rate in the Percentage input box.
You can also click the
or
button.
4.
Select the paper source, size and type.
5.
Click OK and print the document.
Fitting Your Document to a Selected Paper Size
You can scale your print job to any selected paper size regardless of the change to the original document size. This can be useful when you
want to check fine details on a small document.
1.
To change the print settings from your software application, go to printer properties.
2.
From the Paper tab, select Fit to Page on the Output size drop-down list.
3.
Select the correct size from the Fit to Page drop-down list.
4.
Select the paper source, size and type.
5.
Click OK and print the document.
Printing Posters