Dell 5330dn Workgroup Mono Laser Printer - Manual (Page 14)

Tray Behavior
Bin Setup
2.Report
linked source.
Menu selection: Purpose: Values:
Tray Linking When you select any other value
except Auto from Paper
Size/Type and the selected tray
is empty, you can set the printer
automatically to print from other
trays. On
Off
If this menu item is set to Off,
the printer doesn't work until you
insert paper into the specified
tray.
Substitute Size Substitutes the specified paper
size if the requested size is not
loaded. Nearest Size
Off
Substitute size set to Off means
no substitution is allowed for the
requested paper size. See
"Substitute Size" .
Configure MPF Determines when the printer
selects paper loaded in the multi-
purpose feeder. Bypass
Tray Mode
l Bypass: Paper loaded in
the multi-purpose feeder is
used first when printing a
job, even though there is
paper in other trays.
l Tray Mode: Paper loaded
in the multi-purpose feeder
is used last when printing
a job.
NOTE: Bin Setup is only displayed when at least one optional output expander is installed.
Menu selection: Purpose: Values:
Bin Setup An output expander increases
the capacity of paper output. Link
De-Link
l Link: The printer continues
to print using the output
expander after the
standard output tray is full.
l De-Link: The printer stops
printing when standard
output tray is full.
Menu selection: Purpose: Values:
Report Menu Map
Configuration
Demo page
Network Settings
Job History
Job Meter
PCL Font List
PS Font List
Error History
After selecting each item, the
page will print, and the printer
will return to Ready.
l Menu Map: Shows the
layout and current settings
of the control panel menu
items.
l Configuration: Shows the
printer's current
configuration.
l Demo page: Allows you to
check if your printer
properly performs printing.
l Network Settings: Prints
information relating to
network settings and
verifies the network
connection. Also provides
information to configure
printer for network
printing.
l Job History: Shows the list
of completed print jobs.
The list contains up to 25
files from the latest print
jobs.
l Job Meter: Contains the
total number of pages
printed by person or group.
This page can be used for
cost accounting.
l PCL Font List: Prints a
sample of all printer fonts
available for PCL
emulation.
l PS Font List: Prints a
sample of all printer fonts
available for PostScript
emulation.
l Error History: Shows the
list of errors occured.