Dell 5330dn Workgroup Mono Laser Printer - Manual (Page 19)

TCP/IP (IPv4)
TCP/IP (IPv6)
Netware
AppleTalk
Menu selection: Purpose: Values:
Ethernet Speed Allows selection of ethernet
speed. Auto
10M Half
10M Full
100M Half
100M Full
Giga Full
Menu selection: Purpose: Values:
IPv4 Activate Activates or deactivates the IPv4. On
Off
l On: Activates the IPv4.
l Off: Deactivates the IPv4.
View Host name Displays the Host name. View only
Set IP Address Allows you to manually set the
TCP/IP addresses or receive the
addresses from the network. Manual
IP Address
Subnet
Mask
Gateway
You can enter IP Address, Subnet
Mask, and Gateway manually.
DHCP The DHCP server allots the IP
address to you automatically
BOOTP The BOOTP server allots the IP
address to you automatically.
Show IP Address Displays the assigned IP Address. View only
Menu selection: Purpose: Values:
IPv6 Activate Activates or deactivates the IPv6. On
Off
l On: Activates the IPv6.
l Off: Deactivates the IPv6.
DHCPv6 Config This item lets you select the
DHCPv6 operation. Router Use DHCPv6, as directed by a
router.
DHCPv6
addresses Always use DHCPv6 regardless of
router request.
DHCPv6 Off Deactivates the DHCPv6.
Menu selection: Purpose: Values:
Activate Activates or deactivates the
Netware feature. On
Off
l On: Activates the Netware
feature.
l Off: Deactivates the
Netware feature.
Frame Type Lets you select the IPX frame
type. Auto
802.2
802.3
Ethernet II
SNAP
l Auto: Set the printer to
select the frame type
automatically.
l 802.2: Select this value to
use the IEEE 802.2 frame
type.
l 802.3: Select this value to
use the IEEE 802.3 frame
type.
l Ethernet II: Select this
value to use the Ethernet 2
frame type.
l SNAP: Select this value to
use the SNAP frame type.
Menu selection: Purpose: Values:
Activate Activates or deactivates the
Netware feature. On
Off
l On: Activates the AppleTalk
feature.
l Off: Deactivates the
AppleTalk feature.