Dell 5330dn Workgroup Mono Laser Printer - Manual (Page 16)

Quality
Use this menu selection to change settings that affect print quality and save toner.
Finishing
Use this menu selection to define how the printer delivers the printed output.
required carriage return to each
line feed.
LF+CR
Date & Time (Only
if HDD is installed) See "Setting the time and date" .
DayLight Saving
(Only if HDD is
installed) See "Setting Daylight Savings
Time" .
Manual
Auto
Off
Menu selection: Purpose: Values:
Resolution Selects printed output resolution. 600dpi
1200dpi
Draft Mode
Specifies the number of dots
printed per inch (dpi). The higher
the setting, the sharper the
printed characters and graphics
appear.
l If the print jobs are mostly
text, select 600dpi-
Normal for the highest
quality printing.
l Select 1200dpi-Best when
your job contains
bitmapped images, such as
scanned photos or some
graphics, that will benefit
from enhanced line
screening.
Darkness Lightens or darkens printed
output and conserves toner. Normal
Light
Dark
Lighten or darken the print on
the page by changing the toner
density setting. The Normal
setting usually produces the best
result. Use the Light toner
density setting to save toner.
Menu selection: Purpose: Values:
Copies Set the default number of copies
by selecting any number from 1
to 999. 1 - 999
Orientation Choose the default orientation of
the print image on the page. Portrait
Landscape
Margin Shift Set the margin of print materials
for one-sided printing. Increase
or decrease the value in 0.1 mm
increments. Top Margin
[0-250]
Left Margin
[0-164]
l Top Margin: Set the top margin,
from 0 to 250 mm.
l Left Margin: Set the left margin,
from 0 to 164 mm.
Duplex To print on both sides of paper. Off
Long Edge
Short Edge
Choose the binding edge as follows.
l Long Edge: Flip on the long
edge.
l Short Edge: Flip on the short
edge.