Dell 5330dn Workgroup Mono Laser Printer - Manual (Page 18)

Factory Defaults
4.Job Management
Stored jobs
Job Expiaration
RAM Disk Limit
Clear Stored Job
5.Network I/O Ports
This menu lets you configure the network interface installed in your printer. You can reset the network interface and print a configuration page.
Ethernet Speed
2nd Form l 2nd Form: When you
select Double Form in
Form Menu, this menu is
displayed.
Menu selection: Purpose: Values:
Factory Defaults Returns printer settings to the
factory default values. Do Not Restore
Restore Now
l Do not Restore: User-
defined settings remain.
l Restore Now: All menu
items are returned to the
factory-default values
except:
l Display Language
l All settings in the
Parallel Menu, Serial
Menu, Network
Menu, and USB Menu
l Resource residing in
flash memory or on
the hard disk
NOTE: All downloaded resources
(fonts, macros, and symbols sets)
in printer memory (RAM) are
deleted.
Menu selection: Purpose: Values:
Stored jobs Print jobs currently stored in the
hard disk User ID1
User ID2
Menu selection: Purpose: Values:
Job Expiration Limits the amount of time a
confidential job stays in the
printer before it is deleted. Off
1 hour
4 hour
24 hour
1 week
Menu selection: Purpose: Values:
RAM Disk Limit Uses up to 96 MB of printer’s
memory for Secure print.
NOTE: If you install an additional
printer memory, you can use your
printer's memory up to 288 MB for
Secure print.
0 MB ~ 96 MB
Menu selection: Purpose: Values:
Clear Stored Job Delete jobs currently stored in
the hard disk and RAM disk. Secure Job
Stored Print
ALL
ALL: All Secure Jobs
and Stored Prints are deleted.