Dell 5330dn Workgroup Mono Laser Printer - Manual (Page 79)

Loading Print Media in the Paper Tray
For the majority of your print jobs, load the print media in tray 1. Tray 1 can hold a maximum of 500 sheets of 75 g/m 2 (20 lb) plain paper.
For added capacity of 500 sheets per tray, you can purchase optional trays and attach them below the standard tray. You can attach up to three additional
trays. For order information for optional trays, see
"Installing Optional Tray" for installation instructions.
To use many different types and sizes of paper, see "Identifying Print Media Sources and Specifications" .
To load print media into tray 1 or optional trays (both are loaded the same way), follow these instructions .
1. Pull open the paper tray and load paper with the print side face down.
Load letterhead paper with the design side face down. The top edge of the sheet with the logo should be placed at the front side of the tray.
For details about loading paper in the paper tray, see "Loading Print Media" .
Using the Multi-purpose Feeder
Use the Multi-purpose Feeder to print transparencies, labels, envelopes, or postcards, in addition to making quick runs of paper types or sizes that are not
currently loaded in the paper tray.
Acceptable print materials are plain paper ranging from 3.0 by 5.0 in. (76 by 127 mm) to Legal, 8.5 by 14 in. (216 by 356 mm) - the largest size acceptable -
and weighing 16 lb - 56 lb.
NOTE: If you experience problems with paper feed, place the paper in the Multi-purpose Feeder.
NOTE: You can load previously printed paper. The printed side should be facing up with an uncurled edge at the front. If you experience problems with
paper feed, turn the paper around. Note that the print quality is not guaranteed.