Dell 1135n Multifunction Mono Laser Printer - Manual (Page 16)

Windows® 7 Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or
higher 1 GB (2 GB) 16 GB
Support for Direct® 9 graphics with 128 MB memory (to enable the Aero theme).
DVD-R/W Drive
Windows Server®
2008 R2 Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors
(2 GHz or faster) 512 MB (2048
MB) 10 GB
Internet Explorer® 5.0 or higher is the minimum requirement for all Windows operating systems.
Administrator rights are required to install the software.
Windows Terminal Services is compatible with this machine.
Macintosh
OPERATING
SYSTEM
Requirements (recommended)
CPU RAM
free HDD
space
Mac OS X 10.3 ~
10.4 Intel® Processors
PowerPC G4/ G5 128 MB for a PowerPC based Mac
(512 MB)
512 MB for a Intel-based Mac (1 GB) 1 GB
Mac OS X 10.5 Intel® Processors
867 MHz or faster Power PC
G4/ G5 512 MB (1 GB) 1 GB
Mac OS X 10.6 Intel® Processors 1 GB (2 GB) 1 GB
Linux
Item Requirement (recommended)
Operating system RedHat® Enterprise Linux WS 4, 5 (32/64 bit)
Fedora Core 2~10 (32/64 bit)
SuSE Linux 9.1 (32 bit)
OpenSuSE® 9.2, 9.3, 10.0, 10.1, 10.2, 10.3, 11.0, 11.1 (32/64 bit)
Mandrake 10.0, 10.1 (32/64 bit)
Mandriva 2005, 2006, 2007, 2008, 2009 (32/64 bit)
Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10 (32/64 bit)
SuSE Linux Enterprise Desktop 9, 10 (32/64 bit)
Debian 3.1, 4.0, 5.0 (32/64 bit)
CPU Pentium® IV 2.4 GHz (Intel Core™2)
RAM 512 MB (1024 MB)
Free HDD space 1 GB (2 GB)
It is necessary to claim swap partition of 300 MB or larger for working with large scanned images.
The Linux scanner driver supports the optical resolution at maximum.
Installing USB connected machine’s driver
A locally connected machine is a machine directly attached to your computer using the USB cable. )
Only use an USB cable shorter than 3 m (118 in. ).
Windows
You can install the machine software using the typical or custom method.
The following steps below are recommended for most users who use a machine directly connected to your computer.
All components necessary for machine operations will be installed.
1. Make sure that the machine is connected to the computer and powered on.
If the “Found New Hardware Wizard” window appears during the installation procedure, click Cancel in
close the window.
2. Insert the supplied software CD into your CD/DVD drive.