Dell 1135n Multifunction Mono Laser Printer - Manual (Page 42)

Copying
This chapter gives you step-by-step instructions for copying documents.
This chapter includes:
Basic copy
Changing the settings for each copy
Changing the default copy settings
Using special copy features
Deciding the form of copy output
Setting copy timeout
Supported optional devices and features may differ according to your printer model.
(See
Features by Model ).
Basic copy
This is the normal and usual procedure for copying your originals.
1. Press Copy ( ) on the control panel.
2. Load originals face up into the document feeder, or place a single original face down on the scanner glass.
(See
On the scanner glass or In the document feeder ).
3. If necessary, adjust the settings for each copy such as Reduce/Enlarge, Darkness, Original Type and more
(See
Changing the settings for each copy ).
4. Enter the number of copies using the arrow or number keypad, if necessary.
5. Press Start( ) on the control panel to begin copying.
To cancel the current copy job, press Stop/Clear ( ) on the control panel.
Changing the settings for each copy
Your machine provides default settings for copying so that you can quickly and easily make a copy. However, if you
want to change the options for each copy, use the copy function buttons on the control panel.
If you press Stop/Clear ( ) while setting the copy options, all of the options you have set for the current copy
job will be canceled and return to their default status after the machine completes the copy in progress.
Changing the darkness
If you have an original containing faint marking and dark images, you can adjust the brightness to make a copy that
is easier to read.
1. Press Copy ( ) on the control panel.
2. Press Menu ( ) on the control panel.
3. Press the left/right arrow until Copy Feature appears and press OK.
4. Press the left/right arrow until Darkness appears and press OK.
5. Press the left/right arrow until the contrast mode you want appears and press OK.
Light: Works well with dark print.
Lightest: Works well with darker print.
Normal: Works well with standard typed or printed originals.
Dark: Works well with light print.
Darkest: Works well with lighter print or faint pencil markings.
6. Press Stop/Clear ( ) to return to ready mode.
Selecting the type of originals
The original type setting is used to improve the copy quality by selecting the document type for the current copy