Setting job timeout – Dell 1135n Multifunction Mono Laser Printer User Manual
Page 28
Advertising
5.
Select tray (source) and its options, such as paper size and type.
6.
Press OK.
Setting job timeout
When there is no input for a certain period of time, the machine exits the current menu and goes in to the default
settings. You can set the amount of time the machine will wait.
1.
Press Menu (
) on the control panel.
2.
Press the left/right arrow until System Setup appears and press OK.
3.
Press the left/right arrow until Machine Setup appears and press OK.
4.
Press the left/right arrow until Job Timeout appears and press OK.
5.
Enter the time using left/right arrow or numeric keypad.
6.
Press OK to save the selection.
7.
Press Stop/Clear (
) to return to ready mode.
Advertising