Dell 1135n Multifunction Mono Laser Printer - Manual (Page 67)

Mode
machine does not support this feature.
You can set the dial mode for your machine to either tone dialling or pulse dialling. If you have a public
telephone system or a private branch exchange (PBX) system, you may need to select Pulse. Contact
your local telephone company if you are not sure which dial mode to use.
If you select Pulse, some phone system features might not be available. It can also take longer to dial a
fax or phone number.
Receiving
Option Description
Receive
Mode You can select the default fax receiving mode. For details on receiving faxes in each mode, see
Changing the receive modes .
Ring To
Answer
You can specify the number of times the machine rings before answering an incoming call.
Stamp
RCV
Name
This option allows the machine to automatically print the page number, and the date and time of
reception at the bottom of each page of a received fax.
RCV
Start
Code
This code allows you to initiate fax reception from an extension phone plugged into the EXT socket on
the back of the machine. If you pick up the extension phone and hear fax tones, enter the code. It is
preset to *9* at the factory.
Auto
Reduction When receiving a fax containing pages as long as or longer than the paper loaded in the paper tray,
the machine can reduce the size of the original to fit the size of the paper loaded in the machine.
Turn on this feature if you want to automatically reduce an incoming page.
With this feature set to Off, the machine cannot reduce the original to fit onto one page. The original
will be divided and printed in actual size on two or more pages.
Discard
Size
When receiving a fax containing pages as long as or longer than the paper in your machine, you can
set the machine to discard a specific length from the end of the received fax. The machine will print
the received fax on one or more sheets of paper, minus the data that would have been on the specified
discard segment.
When the received fax contains pages larger than the paper in your machine, and Auto Reduction
has been turned on, the machine will reduce the fax to fit on the existing paper, and nothing will be
discarded.
Junk Fax
Setup
This setting may not be available depending on your country. Using this feature, the system will not
accept faxes sent from remote stations whose numbers are stored in the memory as junk fax numbers.
This feature is useful for blocking any unwanted faxes.
When you turn on this feature, you can access the following options to set junk fax numbers.
Add: Allows you to set up to 10 fax numbers.
Delete: Allows you to delete the desired junk fax number. If you select Delete All, Allows you to
delete all junk fax numbers.
DRPD
Mode This mode enables a user to use a single telephone line to answer several different telephone
numbers. In this menu, you can set the machine to recognize which ring patterns to answer. For
details about this feature, see
Receiving faxes using DRPD mode .
Change Default
Option Description
Resolution Changing the resolution setting affects the appearance of the received document.
Standard: Originals with normal sized characters.
Fine: Originals containing small characters or thin lines or originals printed using a dot-matrix
printer.
Super Fine: Originals containing extremely fine detail. Super Fine mode is enabled only if the
machine with which you are communicating also supports the Super Fine resolution.
For memory transmission, Super Fine mode is not available. The resolution setting is
automatically changed to Fine.
When your machine is set to Super Fine resolution and the fax machine with which you
are communicating does not support Super Fine resolution, the machine transmits using
the highest resolution mode supported by the other fax machine.
Photo Fax: Originals containing shades of gray or photographs.
Color Fax: Originals with colors. Sending a color fax is enabled only if the machine with which you
are communicating supports color fax reception and you send the fax manually. In this mode,