Adding job type settings – Dell 1135n Multifunction Mono Laser Printer User Manual
Page 52
4.
Click Properties.
5.
Load originals face up into the document feeder, or place a single original face down on the scanner glass.
(See
).
6.
From the Scanner Properties window, click Preview.
The document is scanned and the image preview appears in the Preview Pane.
7.
Drag the pointer to set the image area to be scanned in the Preview Pane.
8.
Change the scan options in the Image Quality and Scan Area sections.
Image Quality: This option allows you to select the color composition and the scan resolution for the
image.
Scan Area: This option allows you to select the page size. The Advanced button enables you to set the
page size manually.
If you want to use one of the preset scan option settings, select the option from the Job Type drop-down list
(See
).
Click Default to restore the default setting for the scan options.
9.
When you have finished, click Scan to start scanning.
The status bar appears on the bottom left of the window to show you the progress of the scan. To cancel
scanning, click Cancel.
10.
The scanned image appears.
If you want to edit the scanned image, use the toolbar (See
11.
When you are finished, click Save on the toolbar.
12.
Select the file directory where you want to save the image and enter the file name.
13.
Click Save.
Adding Job Type Settings
You can save your scan option settings for later use.
To save a new Job Type setting:
1.
Change the options from the Scanner Properties window.
2.
Click Save As.
3.
Enter the name for your setting.