Dell 1135n Multifunction Mono Laser Printer - Manual (Page 91)

Transparency ?
Envelope ?
Preprinted ?
Cotton ?
Recycled ? ?
Archive ? ?
(?: supported, Blank: not supported)
The media types are shown in the Printing Preferences. This paper type option allows you to set the type of paper to
be loaded in the tray. This setting appears in the list, so that you can select it. This will let you get the best quality
printout. If not, the desired print quality may not be achieved.
Plain: Normal plain paper. Select this type if your machine is monochrome and printing on the 60 to 90 g/m
2
(16
to 24 lb).
Thick: 90 to 105 g/m
2
(24 to 28 lb) thick paper.
Thin: 60 to 70 g/m 2 (16 to 19 lb) thin paper.
Bond: 105 to 120 g/m 2 (28 to 32 lb) bond.
Color: 75 to 90 g/m
2
(20 to 24 lb) color-backgrounded paper.
CardStock: 90 to 163 g/m 2 (24 to 43 lb) cardstock.
Labels: 120 to 150 g/m 2 (32 to 40 lb) labels.
Transparency: 138 to 146 g/m
2
(37 to 39 lb) transparency paper.
Envelope: 75 to 90 g/m
2
(20 to 24 lb) envelope.
Preprinted: 75 to 90 g/m 2 (20 to 24 lb) preprinted/letterhead paper.
Cotton: 75 to 90 g/m
2
(20 to 24 lb) cotton paper.
Recycled: 75 to 90 g/m
2
(20 to 24 lb) recycled paper.
When you use recycled paper as a used paper, printouts might be wrinkled.
Archive: 70 to 90 g/m
2
(19 to 24 lb). If you need to keep the print-out for a long period time, such as archives,
select this option.
Envelope
Successful printing on envelopes depends upon the quality of the envelopes.
To print an envelope, the stamp area is on the left side and the end of the envelope with the stamp area enters the
printer first and the envelope in the center of the manual tray with the stamp area entering the printer first and
keeping the stamp on the left.
If envelopes are printed out with wrinkles, crease or black bold lines, open the rear cover and pull down the pressure
lever and try printing again. Keep the rear cover opened during printing.
1. Pressure lever
When selecting envelopes, consider the following factors: