Dell 1135n Multifunction Mono Laser Printer - Manual (Page 48)

7. Press the left/right arrow until the setting you want appears and press OK.
Resolution: Sets the image resolution.
Scan Color: Sets the color mode.
Scan Format: Sets the file format in which the image is to be saved.
Scan Size: Sets the image size.
Scan Format appears only when you selected the Scan destination to My Documents.
If you want to scan from the default setting, press Start.
8. Scanning begins.
Scanned image is saved in computer’s My Documents > My Pictures > Dell folder.
You can use Twain driver to scan quickly in Dell Scan and Fax Manager program.
You can also scan by pressing Window’s Start > Control Panel > Dell Scan and Fax Manager >
Quick Scan.
For network connected machine
Make sure the printer driver is installed on your computer using the software CD, since the printer driver includes
the scan program (See
Installing network connected machine’s driver ).
1. Make sure that your machine and the computer are connected to a network and Dell Scan and Fax Manager is
installed on the computer.
2. Load originals face up into the document feeder, or place a single original face down on the scanner glass.
3. Press Scan ( ) on the control panel.
4. Press the left/right arrow until Scan To PC appears and press OK.
5. Press the left/right arrow until Network PC appears and press OK.
If you see Not Available message, check the port connection.
6. Select your registered computer ID, and enter the Password if necessary.
ID is the same ID as the registered Computer ID for Dell Scan and Fax Manager.
Password is the 4 digit number registered Password for Dell Scan and Fax Manager.
7. Press the left/right arrow until the application program you want appears and press OK.
Default setting is My Documents.
To add or delete the folder where the scanned file is saved, add or delete the application program in Dell
Scan and Fax Manager > Properties > Set Scan Button.
8. Press the left/right arrow until the setting you want appears and press OK.
Resolution: Sets the image resolution.
Scan Color: Sets the color mode.
Scan Format: Sets the file format in which the image is to be saved.
Scan Size: Sets the image size.
Scan Format appears only when you selected the Scan destination to My Documents.
If you want to scan from the default setting, press Start.
9. Scanning begins.
Scanned image is saved in computer’s My Documents > My Pictures > Dell folder.
You can use Twain driver to scan quickly in Dell Scan and Fax Manager program.
You can also scan by pressing Window’s Start > Control Panel > Dell Scan and Fax Manager >
Quick Scan.
Using Dell Scan and Fax Manager
If you have installed the printer driver, the Dell Scan and Fax Manager program is installed too. Start Dell Scan and
Fax Manager program to find out about this program information and the installed scan driver's condition. Through this
program, you can change scan settings and add or delete the folders where scanned documents are saved in your
computer.
The Dell Scan and Fax Manager program can only be used in the Windows.
1. From the Start menu, click Control Panel > Dell Scan and Fax Manager.
2. Select the appropriate machine from the Dell Scan and Fax Manager window.
3. Press Properties.