Using the dashboard events option, Using the event filter – Dell PowerVault DR2000v User Manual
Page 101
5.
In Timestamp From, click in the field or click the calendar icon to display the current month and day.
•
Click and select a day in the current month schedule (or use the left and right arrows in the month title to select
a previous or later month, respectively).
•
Use the Hour and Minute sliders to set the desired time in hours and minutes, or click Now to use the current
time.
•
When configured, click Done.
6.
In Timestamp To, click in the field or click the calendar icon to display the current month and day.
•
Click and select a day in the current month schedule (or use the left and right arrows in the month title to select
a previous or later month, respectively).
•
Use the Hour and Minute sliders to set the desired time in hours and minutes, or click Now to use the current
time.
•
When configured, click Done.
7.
Click Start Filter to display system events in the Events summary table based on the settings you selected.
The Events summary table displays system events based on Index, Severity, Timestamp, and Message (a brief
description of event). To navigate and display results in the Events summary table, complete the following:
•
Set the number of events to display per page: click Events per page at the lower-right corner of the table and
select either 25 or 50 events to display per page.
•
Use the scroll bar to display each full page of system events.
•
To display other pages of system events, click prev or next, click on a specific page number, or enter a page
number in the Goto page and click Go to display that page of system events.
8.
To clear the current filter settings, click Reset and set new filter values using the process described in steps 3
through 6.
For more information about using the Event Filter on the Events page, see
.
Using the Dashboard Events Option
To use the DR Series navigation panel to display the current number of system events, complete the following:
1.
Click Dashboard→ Events in the navigation panel.
The Events page is displayed, which lists the total number of system events in the System Events summary table,
and provides the current timezone (for example, US/Pacific).
2.
View the list of current system events in the System Events summary table, which are grouped by index number,
severity, timestamp, and a brief description of the event message.
3.
Use the Event Filter to search for events that match the criteria you select (event severity, message content,
timestamp from, and timestamp to ranges).
For more information on using the Event Filter, see
Using the Dashboard to Display
.
Using the Event Filter
The Events page contains an Event Filter pane that lets you filter the type of system events you want to display in the
Events summary table. Event filtering is done by selecting the severity level and using a timestamp. Choose the severity
level by selecting it in the Event Severity drop-down list, and refine your search by selecting specific start and end
setpoints in Timestamp from and Timestamp to.
101