Editing administrator contact information, Managing passwords, Modifying the system password – Dell PowerVault DR2000v User Manual
Page 77: Modifying password reset options, Information see, Modifying password reseting options
Editing Administrator Contact Information
To edit the contact information for an existing system administrator, complete the following:
1.
Select System Configuration→ Admin Contact Info.
The Administrator Contact Information page is displayed.
2.
Click Edit Contact Info on the options bar.
The Edit Administrator Contact Information dialog is displayed.
3.
Modify the notification selections as needed.
4.
Click Submit.
The Administrator Contact Information page is displayed, and an Updated administrator contact information dialog
is displayed when successful.
Managing Passwords
You can edit the system password and system password reset configuration on this page.
Modifying the System Password
To configure a new password or to modify an existing password for logging in to the DR Series system, complete the
following:
1.
To change the system password, do one of the following:.
•
In the navigation panel, select System Configuration, the System Configuration page is displayed. Click
Password Management.
•
In the navigation panel, select System Configuration → Password, the Password Management page is
displayed.
2.
Click Edit Password.
The Edit Password dialog is displayed.
3.
In Current password, type the current password for the system.
4.
In New password, type the new system password.
5.
In Confirm password, retype the new password to confirm this as the new password replacing the existing system
password.
6.
Click Change Password (or click Cancel to display the System Configuration page).
If successful, a Password change was successful dialog is displayed.
Modifying Password Reset Options
To modify the password reset options:
1.
Select System Configuration → Password.
The Password Management page is displayed.
2.
Click Edit Password Reset Options.
The Edit Password Reset Options dialog is displayed.
3.
To use service tag only, select Service Tag Only and click Submit.
NOTE: To select the option Service Tag and Administrator Email, you must first configure the e-mail relay host
and administrator contact e-mail.
77