Dell PowerVault DR2000v - Manual (Page 115)

Item Description
Active Clients Displays the total clients configured in all appliances in the Global
View, organized by container connection type.
Appliance List
This section lists all appliances in the Global View with a high-level snapshot of their status. By default, appliances are
listed in alphabetic order by Appliance Name. You can sort the list by a particular column by clicking the column header,
which toggles between ascending and descending sort order. This sort order is retained even if you leave the page and
return later.
NOTE: The information in the appliance list refreshes every 15 seconds.
The following table describes the information displayed in the appliance list:
Item Description
Appliance Name Lists the Active Directory fully-qualified domain name (FQDN), and
contains links to each respective DR Series system. Hover your
mouse over the appliance name to display the following
information:
• Model
• Service Tag
• Software Version
• Expansion Shelves
• iDRAC IP
• Management IP
• Administrator Contact Information
Status Displays the system operational state by using an icon.
• A green icon indicates that the system is operational.
Hovering your mouse over a greenStatus icon displays the
message Operational.
• A red icon indicates that the system is not connected.
Hovering your mouse over a red Status icon displays the
message Connect Failed. This can occur if the DR Series
system is removed from the Active Directory Services (ADS)
domain, if it is down, or being rebooted.
NOTE: If the system administrator re-adds the DR Series
system back into the ADS domain, the logged out DR
Series system will not automatically be logged back in.
In this case, the Reconnect Units link will be enabled,
and you must manually log in to the DR Series system.
Capacity Displays the used and free physical storage capacity in
percentages and volume in Gibibytes and Tebibytes (GiBs and
TiBs). The capacity appears as a progress bar with a percentage
shown.
115