Dell PowerVault DR2000v - Manual (Page 103)

Using the Dashboard Page to Monitor System Health
To use the Dashboard page to display and monitor the current DR Series system hardware status, complete the
following:
1. Click Dashboard in the navigation panel.
The Dashboard page is displayed and provides a HW State link in the System Status bar (for example, HW State:
optimal). (You can also access the Health page when you click Dashboard→ Health.)
2. Click the HW State link (in this example, optimal) to display the Health page.
The Health page provides a System tab, which is the default displayed on this page. If you have installed at least
one enclosure, your system will also include an Enclosure tab. The System tab displays front and rear views of the
chassis showing the disk drive locations in the front view (0–11), the OS internal drives (12–13), and the fans,
system connectors, and power supplies in the rear view. If installed and clicked, the Enclosure tab displays front
and rear views of the enclosure chassis showing the physical disk locations (0–11) in the front view, and the
enclosure connectors, fans, and pluggable drive locations in the rear view. In addition, the service tag of the
expansion shelf is displayed. Both the System and Enclosure tabs display the System Hardware Health summary
table that lists the current status of all major components in the DR Series system or its expansion shelf,
respectively.
NOTE: This method is convenient when you are already at the Dashboard page and want to display more
information about current System Status.
DR Series system — System Hardware Health components
• Power Supplies
• Fans
• Temperature
• Storage
• Voltage
• NIC
• CPU
• DIMM
• NVRAM
Enclosure — System Hardware Health components
• Power Supplies
• Fans
• Temperature
• Storage
• Enclosure Management Module (EMM)
103