Dell PowerVault DR2000v - Manual (Page 89)

Moving Data Into a Container
To move data into an existing DR Series system container, complete the following:
1. Click Start → Windows Explorer → Network.
The Network page is displayed, which lists all current computers.
2. In the browser Address bar, click Network to select your DR Series hostname or IP address.
The Network page is displayed, which lists all current storage and replication containers.
NOTE: However, if your DR Series system is not listed, you can enter its hostname or IP Address preceded by
"https://" and followed by the container name in the Address bar to access it (for example in this format,
https://10.10.20.20/container-1). The DR Series system only supports the Hypertext Transfer Protocol Secure
(HTTPS) form of IP addressing.
3. Move data from the source location to the destination container using your regular DMA or backup application
process.
NOTE: If any file ingested by the DR Series system by a DMA or backup application is renamed or deleted
without using the DMA or backup application’s process, the corresponding catalog must be updated
accordingly. Failure to do so may prevent the DMA or backup application from being able to access the data.
4. Verify that the data recently moved now resides in the destination container (or click Dashboard → Container
Statistics, select the destination container in the Container Name drop-down list, and view the following
information panes for recent container activity:
• Backup Data
• Throughput
• Connection Type
• Connection Configuration
Displaying Container Statistics
To display the current statistics for an existing container that stores your data, complete the following:
89