Dell PowerVault DR2000v - Manual (Page 59)

and Rapid CIFS supported client modes based on architecture and CPU cores, see Best Practices: Rapid NFS and Best
Practices: Rapid CIFS .
Table 4. Supported OST or RDS Client Modes and Settings
OST or RDS Client
Mode Settings 32–Bit OST or RDS
Client (4 or more CPU
cores) 64–Bit OST or RDS
Client (4 or more CPU
cores) 32–Bit OST or RDS
Client (Less than 4
CPU cores) 64–Bit OST or RDS
Client (Less than 4
CPU cores)
Auto Passthrough Dedupe Passthrough Passthrough
Dedupe Not Supported Supported Not Supported Not Supported
Passthrough Supported Supported Supported Supported
About the Schedules Page and Options
To display the Schedules page, click Dashboard → Schedules. This page displays any existing Replication or Cleaner
operations that have been set up for the DR Series system. If no times are listed, this indicates there are no scheduled
Replication or Cleaner operations. The Replication and Cleaner operations will automatically run whenever the DR
Series system detects a window of inactivity when there are no other major system operations running.
NOTE: Replication schedules can only be set on individual replication-enabled source containers.
The Schedules page lets you create a new schedule for running Replication or Cleaner operations, or you can modify an
existing schedule for either of these operations. For more information about scheduling Replication or Cleaner
operations, see
Creating a Cleaner Schedule and Creating a Replication Schedule .
NOTE: Cleaner operations are system processes that reclaim disk space from containers where files were
deleted. When no Cleaner schedule is set, the Cleaner process will run as needed.
The Schedules page displays the following:
• System Time Zone: using the following format (US/Pacific, Tue May 1 10:33:45 2012)
• Scheduled Replication operations: with day of the week (Sunday through Saturday), start time, and stop time
• Scheduled Cleaner operations: with day of the week (Sunday through Saturday), start time, and stop time
NOTE: Schedules only control the source container in scheduled Replication operations; the target container is
passive in these operations.
Setting a Replication Schedule
To set a replication schedule from the Schedules page, complete the following:
NOTE: Replication schedules can only be set on individual replication-enabled source containers.
NOTE: The DR Series system software includes version checking that limits replication only between other DR
Series systems that run the same system software release version. If versions are incompatible, the administrator
will be notified by an event.
1. Click Replication on the options bar, which displays the Replication Schedule page.
Another method to display the Replication Schedule page, click Schedules → Replication Schedule.
2. In Container, select a replication-enabled source container form the drop-down list.
59