Dell PowerVault DR2000v - Manual (Page 117)

NOTE: When you initially navigate to a DR Series system, you will need to accept a browser certificate exception.
After you accept it, the exception does not appear again unless you clear your browser cache.
Adding a DR Series System to Global View
You can add up to 64 machines to your Global View dashboard. This number includes the system on which you are
logged in.
Before you add a system to the Global View dashboard, you must have logged in to the system using your domain
credentials and have added a login group in the domain. For details, see
Prerequisites .
To add a DR Series system to Global View, complete the following:
1. In the left navigation pane, click Global View.
2. On the Global View page, click Add to Global View.
The Add to Global View dialog box is displayed.
3. In DR Unit FQDN or IP address, enter the fully-qualified domain name (FQDN) or IP address of the DR Series system
that you want to add. Keep in mind that the system must be in the same ADS domain, in the same login group, and
have identical credentials to the system on which you are working.
4. In Domain Name (FQDN), the fully-qualified domain name should be already completed. If not, enter it.
5. In Username, enter the domain username for the DR Series system that you want to add. For example, DOMAIN
\administrator. This should be identical to the credentials used in all other systems in the Global View.
6. In Password, enter the domain password for the DR Series system that you want to add. This should be identical to
the credentials used in all other systems in the Global View.
7. Click Add and Connect.
If successful, the Add to Global View dialog box displays “Successfully added DR unit: [name]” and remains open.
8. If you want to add additional systems, repeat the steps. If not, click Close.
Removing a DR Series System from Global View
You can remove any DR Series system from your Global View dashboard except the system that contains the Global
View dashboard. All other systems are available to be removed from your Global View page.
Keep in mind that when you remove a DR Series system from a Global View dashboard on one system, it does not
remove it from any other Global View dashboards you may have added it to on other systems.
To remove a DR Series system from Global View, complete the following:
1. In the left navigation pane, click Global View.
2. On the Global View page, in the appliance list, click the Delete checkbox next to the system you want to delete.
Note that there is no checkbox next to the system that contains the Global View; it is not available to be removed.
3. At the top of the page, click Delete.
A confirmation prompt is displayed.
4. Click OK to confirm the deletion.
The system is deleted from the Global View dashboard.
Reconnecting DR Series Systems
If a system administrator removes a member DR Series system from the ADS domain or if authentication to a member DR
Series system fails (such as when the system is down), then the Global View dashboard displays a red icon in the Status
117