Dell PowerVault ML6000 - Manual (Page 123)

Dell PowerVault ML6000 Basic SNMP Reference Guide 117
STATUS mandatory
DESCRIPTION "Blade state"
::= { bladeEntry 12 }
blHPFLinkDownThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Used to set the Link Down threshold delay period in
seconds. The failover is triggered when the delay period
ends."
::= { bladeEntry 13 }
blHPFErrorRecoveryMode OBJECT-TYPE
SYNTAX FcHPFRecoveryType
ACCESS read-only
STATUS mandatory
DESCRIPTION "Used to set the global recovery mode for
failures that happen due to FC cable errors
Values: returnToActive(0), returnToStandby(1),
requiresIntervention(2)"
::= { bladeEntry 14 }
blHPFLinkDownRecoveryMode OBJECT-TYPE
SYNTAX FcHPFRecoveryType
ACCESS read-only
STATUS mandatory
DESCRIPTION "Used to set the global recovery mode for
failures that happen due to Link Down Errors
Values: returnToActive(0), returnToStandby(1),
requiresIntervention(2)"
::= { bladeEntry 15 }
-- One Level down
-- Blade Device Info
blDevTable OBJECT-TYPE
SYNTAX SEQUENCE OF BlDevEntry
MAX-ACCESS not-accessible