Dell PowerVault ML6000 - Manual (Page 99)

Dell PowerVault ML6000 Basic SNMP Reference Guide 93
phDriveFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device firmware level as would be reported in
a SCSI Inquiry command."
::= { physicalDriveEntry 7 }
phDriveLogicalLibraryName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the logical library (partition)
to which this physical drive is associated.
If the drive is not associated with a logical
library, this field will be blank."
::= { physicalDriveEntry 8 }
phDriveLibrarySerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial Number of the library that this drive is
in as reported in SCSI Inquiry command,"
::= { physicalDriveEntry 9 }
phDriveState OBJECT-TYPE
SYNTAX OnlineState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device SCSI State."
::= { physicalDriveEntry 10 }
phDriveRasStatus OBJECT-TYPE
SYNTAX RASSubSystemStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Drive health status."