Dell PowerVault ML6000 - Manual (Page 133)

Dell PowerVault ML6000 Basic SNMP Reference Guide 127
blHPFMapPrimaryPort INTEGER, -- The port index of the active port
blHPFMapStandbyList OCTET STRING ,
-- Comma separated list of standby Ports
blHPFMapActivePort INTEGER -- The port index of the active port
}
blHPFMapVirtualPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The virtual port index. The value is usually the same
as the physical port index, but will be zero if HPF
is not configured."
::= { blHPFMapEntry 1 }
blHPFMapPrimaryPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The physical port index that acts as the
default standby"
::= { blHPFMapEntry 2 }
blHPFMapStandbyList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The comma separated list of ports that are
configured as standbys for the virtual port
(excluding the primary port)."
::= { blHPFMapEntry 3 }
blHPFMapActivePort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory