Camera and microphone assembly, Removing the camera and microphone assembly, Replacing the camera and microphone assembly – Dell Vostro 1710 (Early 2008) User Manual

Page 45

Advertising
background image

8. Replace the keyboard (see

Replacing the Keyboard

).

9. Replace the hinge cover (see

Replacing the Hinge Cover

).

10. Reconnect the antenna to the WLAN card (see

Replacing a WLAN Card

).

Camera and Microphone Assembly

Removing the Camera and Microphone Assembly

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your

computer.

1. Follow the instructions in

Before Working on Your Computer

.

2. Disconnect the antenna from the WLAN card (see

Removing a WLAN Card

).

3. Remove the hinge cover (see

Removing the Hinge Cover

).

4. Remove the keyboard (see

Removing the Keyboard

).

5. Remove the display assembly (see

Removing the Display Assembly

).

6. Remove the display bezel (see

Removing the Display Bezel

).

7. Remove the M2 x 3-mm screw that secures the camera/microphone assembly.

8. Lift the camera/microphone out of the top cover and disconnect the camera/microphone cable.

1 M2 x 3-mm screw (1)

Replacing the Camera and Microphone Assembly

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your

computer.

This procedure assumes that you have completed the removal procedure

Removing the Camera and Microphone Assembly

.

Advertising