Dell Vostro 1710 (Early 2008) - Manual (Page 58)

13. Replace any blanks you removed from the ExpressCard slot and the 8-in-1 card slot.
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside
the computer. Failure to do so may result in damage to the computer.
14. Turn on the computer.
NOTE: If you use a BIOS update program media to flash the BIOS, press <F12> before inserting the media in order to
set the computer to boot from the media for one time only. Otherwise, you must enter the system setup program to
change the default boot order.
15. Flash update the BIOS (see Flashing the BIOS for more information).
16. Enter the system setup program to update the BIOS on the new system board with the computer Service Tag. For
information on the system setup program, see the Dell™ Technology Guide on your computer or at support.dell.com.
Back to Contents Page