Dell Vostro 1710 (Early 2008) - Manual (Page 51)

5 fingerprint reader connector with retaining bracket 6 fingerprint reader
Replacing the Fingerprint Reader
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your
computer.
NOTICE: Ensure that the touch pad cable and the cable for the internal card with Bluetooth® wireless
technology are properly routed before snapping the palm rest into place.
This procedure assumes that you have completed the removal procedure Removing the Fingerprint Reader .
1. Position the fingerprint reader on the underside of the palm rest.
2. Connect the fingerprint reader cable connector to the fingerprint reader connector and rotate the retaining bracket
downward to secure the cable.
3. Replace the fingerprint reader cover and replace the M2 x 3-mm screw that secures the cover to the palm rest.
4. Replace the palm rest (see Replacing the Palm Rest ).
5. Replace the display assembly (see Replacing the Display Assembly ).
6. Replace the keyboard (see Replacing the Keyboard ).
7. Replace the hinge cover (see Replacing the Hinge Cover ).
8. Replace the WLAN card (see Replacing a WLAN Card ).
9. Replace the hard drive cover. See Removing the Hard Drive for an illustration of the hard drive cover.
Back to Contents Page