Dell Vostro 1710 (Early 2008) - Manual (Page 6)

Option Function
Test Memory Run the stand-alone memory test
Test System Run system diagnostics
Exit
Exit the diagnostics
Press <Tab> to select the test you want to run and then press <Enter>.
NOTE: It is recommended that you select Test System to run a complete test on your computer. Selecting Test
Memory initiates the extended memory test, which can take up to thirty minutes or more to complete. When the test
completes, record the test results and then press any key to return to this menu.
After Test System is selected, the following menu appears:
Option Function
Express
Test
Performs a quick test of devices in the system. This typically can take 10 to 20 minutes.
NOTE: The Express Test requires no interaction on your part. Run Express Test first to increase the possibility
of tracing a problem quickly.
Extended
Test
Performs a thorough check of devices in the system. This typically can take an hour or more.
NOTE: The Extended Test periodically requires your input to answer specific questions.
Custom
Test
Use to test a specific device or customize the tests to be run.
Symptom
Tree
This option allows you to select tests based on a symptom of the problem you are having. This option lists the
most common symptoms.
NOTE: It is recommended that you select Extended Test to perform a more thorough check of devices in the
computer.
For any problem encountered during a test, a message appears with an error code and a description of the problem. Write
down the error code and problem description exactly as it appears and follow the instructions on the screen. If you cannot
resolve the problem, contact Dell Support.
NOTE: When contacting Dell Support, have your Service Tag ready. The Service Tag for your computer is located at
the top of each test screen.
The following tabs provide additional information for tests run from the Custom Test or Symptom Tree option:
Tab Function
Results Displays the results of the test and any error conditions encountered.
Errors Displays error conditions encountered, error codes, and the problem description.
Help Describes the test and any requirements for running the test.
Configuration Displays the hardware configuration for the selected device.
The Dell Diagnostics obtains configuration information for all devices from System Setup, memory, and
various internal tests, and displays the information in the device list in the left pane of the screen.
NOTE: The device list may not display the names of all components installed on your computer or all devices
attached to your computer.
Parameters Allows you to customize the test, if applicable, by changing the test settings.