See figure 3-39 – Dell POWEREDGE M915 User Manual
Page 242
Advertising
242
Installing Blade Components
4 Lift up on the left side of the impedance wall to release it from the chassis
inner wall, then slide the impedance wall out of the slot on the expansion-
card riser. See Figure 3-36.
5 Lift the expansion-card riser off the riser guide posts and out of the system.
Figure 3-39. Installing or Removing the Expansion-Card Riser (PowerEdge M610x Only)
1
expansion-card riser
2
riser guide (2)
3
expansion-card slot 1
4
expansion-card slot 2
5
riser guide post (2)
6
power cable connector
7
data cable connector (2 front, 2 back)
1
4
3
5
6
7
2
Advertising