Dell Alienware Aurora R3 (Early 2011) User Manual
Page 10
Advertising
3.
Replace the PCI-Express card(s) (see
Replacing the PCI-Express Card(s)
).
4.
Close the PCI shroud (see
Closing the PCI Shroud
).
5.
Replace the left side-panel (see
Replacing the Left Side-Panel
).
6.
Connect your computer and devices to electrical outlets, and then turn them on.
7.
Enter the system setup utility (see
System Setup
) and restore the settings you recorded in
.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Advertising