Replacing the top vent – Dell Alienware Aurora R3 (Early 2011) User Manual
Page 61
Replacing the Top Vent
1.
Follow the instructions in
Before You Begin
.
2.
Align the screw holes on the top vent with the screw holes on the chassis.
3.
Replace the three screws that secure the top vent to the chassis.
4.
Align the top panel with the slots in the chassis and replace the two screws that secure the top panel to the chassis.
5.
Lay the chassis on its side.
6.
Replace the ten screws that secure the top vent to the top of the chassis.
7.
Replace the right-side top panel (see
Replacing the Right-Side Top Panel
).
8.
Replace the system board (see
Replacing the System Board
).
9.
Replace the top lighting-board (see
Replacing the Top Lighting-Board
).
10.
Replace the drive-bay shroud (see
Replacing the Drive-Bay Shroud
).
11.
Close the PCI shroud (see
Closing the PCI Shroud
).
12.
Replace the memory fan (see
Replacing the Memory Fan
).
13.
Replace the left side-panel (see
Replacing the Left Side-Panel
).
14.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
1
screws (3)
2
top panel
3
top-panel screws (2)
4
top vent
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.